Перейти к основному содержимому

7.3.6 show ipv6 interface

Назначение команды​

Эта команда используется для отображения статуса IPv6 на интерфейсе.

Синтаксис команды​

show ipv6 interface ( IFNAME | ) ( brief | )

Параметры​

ПараметрОписание параметраЗначение параметра
IFNAMEСтатус и конфигурация IPv6 интерфейсаПоддерживаются physical/aggregation/loopback/vlan/tunnel порты
briefКраткое отображение статуса и конфигурации IPv6-

Режим команды​

Privileged EXEC

Примеры​

Switch# show ipv6 interface eth-0-1
Interface eth-0-1
  Interface current state: UP
  The maximum transmit unit is 1500 bytes
  IPv6 is enabled, link-local address is fe80::1233
  Global unicast address(es):
    3001:1::1234, subnet is 3001:1::/64
  Joined group address(es):
    ff02::1:ff00:1234
    ff02::1:ff00:0
    ff02::1:ff00:1233
    ff02::2
    ff02::1
  ICMP error messages limited to one every 2000 milliseconds
  ICMP redirects are always sent
  ND DAD is enabled, number of DAD attempts: 1
  ND router advertisement is disabled
  ND reachable time is 30000 milliseconds
  ND advertised reachable time is 0 milliseconds
  ND retransmit interval is 1000 milliseconds
  ND advertised retransmit interval is 0 milliseconds
  ND router advertisements max interval: 600 secs
  ND router advertisements min interval: 198 secs
  ND router advertisements live for 1800 seconds
  ND router advertisements hop-limit is 0
  Hosts use stateless autoconfig for addresses.
Switch # show ipv6 interface eth-0-1 brief 
*down: administratively down
Interface           Status  Protocol  IPv6 address
eth-0-1             up       up         3001:1::1234
                                           fe80::1233
Switch# show ipv6 interface eth-0-1 brief
*down: administratively down
Interface           Status  Protocol  IPv6 address
eth-0-1             up       up         3001:1::1234
                                           fe80::1233

Связанные команды​

ipv6 enable
ipv6 address